Inspur NX5460M4 User Manual page 55

Only memory of the same type could be used in the same machine. Detailed memory
installation and combination principles are as follows:
a. The white slot shall take the priority, while CPU1 memory shall be symmetrically
installed with CPU0 memory.
b. For single CPU, memory shall follow the screen printed sequence: ChannelA_
DIMM0, ChannelB_DIMM0, ChannelC_DIMM0, ChannelD_DIMM0, ChannelA_
DIMM1...
c. For dual CPUs, CPU0 memory shall follow the screen printed sequence: ChannelA_
DIMM0, ChannelB_DIMM0, ChannelC_DIMM0, ChannelD_DIMM0...; CPU1
memory shall be symmetrically installed with CPU0 memory: ChannelE_0,
ChannelF_0, ChannelG_0, ChannelH_0...
Step 1: Open the lock tabs on both ends of memory slot.
Step 2: Align the bottom key with the receptive point on the slot, press both ends of the
memory with your thumbs, to insert the memory into the slot completely, and the lock tabs
will automatically secure the memory, locking it into place.
5.2.3 Hard Drive Replacement
Step 1: Press the hard drive panel button.
Step 2: The lever on hard disk tray pops up automatically, pull the hard disk tray
outwards to remove it.
Step 3: Use four screws to fix the hard drive into the tray.
Step 4: Install the hard drive into the chassis, and lock the hard drive lever firmly.
5.2.4 Air Duct Replacement
Step 1: Open the upper cover of the chassis.
Step 2: Press the buckles on both ends of the air duct inwards, and then vertically
remove the air duct upwards.
5.2.5 Mainboard Replacement
Step 1: Dismantle all parts and cables connected to mainboard.
Step 2: Lift spring fixed legs on mainboard, then move the mainboard forward to
remove the hardy hole, and vertically remove the mainboard upwards.
５２