Safety Instructions - Inspur NX5460M4 User Manual

1 Safety Instructions

Warning: the following warnings indicate that there are potential dangers that may cause
property loss, personal injury or death:
1. The power supplies in the system may produce high voltages and energy hazards that
may cause personal injury. Please do not demount the cover of the host to remove or
replace any component in the system by yourself, unless otherwise informed by Inspur;
only service technicians trained by Inspur have the right to demount the cover of the
host, remove and replace the internal components.
2. Please connect the equipment to appropriate power supply, and only the type of external
power supply indicated on the electrical ratings label can be used. To protect your
equipment from damages caused by momentary spike or plunge of the voltage, please
use relevant voltage stabilizing equipment or uninterruptible power supply.
3. If you must use an extension cable, use a three-core cable with properly grounded plugs.
Observe extension cable ratings. Ensure that the total rating of all equipment plugged
into the extension cable does not exceed 80 percent of the ratings limit for the extension
cable.
4. Please be sure to use the power supply components that come with the server, such as
power lines, power socket (if provided with the server) etc. For the safety of equipment
and users, do not replace power cables or plugs randomly.
5. To prevent electric shock dangers caused by leakage in the system, please make sure
that the power cables of the system and peripheral equipment are correctly connected
to the earthed power socket. Please connect the three-core power line plug to the three-
core AC power socket that is well earthed and easy to access, be sure to use the earthing
pin of power lines and do not use the patch plug or the earthing pin unplugged with
cables. In case of the earthing conductors not installed and it is uncertain whether there
are appropriate earthing protections, please do not operate or use the equipment. Contact
and consult with the electrician.
6. Please do not push any objects into the openings of the system. Doing so may cause fire
or electric shock because of internal components short circuit.
7. Please place the system far away from the cooling plate and the place with heat sources,
Safety Instructions
１