Inspur NX5460M4 User Manual page 7

1) You shall conduct off the static electricity on the body before dismounting or
touching any electronic component in the equipment. You can conduct off the
static electricity on the body by touching the metal earthing objects (such as the
unpainted metal surface on the rack) to prevent the static electricity on the body
from conducting itself to the sensitive components.
2) For electrostatic sensitive components not ready to be installed for application,
please do not take them out from the antistatic package materials.
3) During the work, please touch the earthing conductor or the unpainted metal surface
on the cabinet regularly to conduct off the static electricity on the body that may
damage the internal components.
7. When dismounting the internal components with the approval of Inspur, please pay
attention to the following matters:
1) Switch off the system power supply and disconnect the cables, including all
connections of the system. When disconnecting the cables, please hold the
connector of cables and plug it out, and never pull the cables.
2) Before dismounting the host cover or touching the internal components, the
products need to be cooled down.
3) Before dismounting or touching any electronic component in the equipment, you
shall conduct off the static electricity on the body by touching the metal earthing
objectives.
4) During the dismounting process, the movement range shall not be too big, so as to
prevent damage to the components or scratching arms.
5) Carefully deal with the components and plug-in cards, and please never touch the
components or connection points on the plug-in cards. When taking the plug-in
cards or components, you should grab the edges of the plug-in cards or components
or their metal fixed supports.
8. During the process of rack installation and application, please pay attention to the
following matters:
1) After the rack installation is finished, please ensure that the stabilizers have been
fixed to the rack and supported to the ground, and all weight of the rack have been
fell onto the ground.
2) Always load from the bottom up, and load the heaviest items first.
3) When pulling out the components from the rack, it shall apply force slightly to keep
４