Inspur NX5460M4 User Manual page 5

and be sure not to block the air vents.
8. Be sure not to scatter food or liquid in the system or on other components, and do not
use the product in humid and dusty environment.
9. Using an incompatible battery may cause explosion. When battery replacement is
required, please consult the manufacturer first, and choose batteries of the same or
equivalent type. Do not disassemble, crush, puncture the batteries or make the external
connection point short circuit, and do not expose them in the environment over 60°C.
Never throw them into fire or water. Please do not attempt to open or repair the
batteries, and be sure to reasonably deal with the exhausted batteries and do not put the
exhausted batteries, the circuit boards that may include batteries and other components
together with other wastes. For relevant battery recycling, please contact the local waste
recycling center.
10. Before installing equipment into the rack, please install all front and side stabilizers
on the independent rack first; for the rack connecting with other racks, it shall install
the front stabilizers first. If you fail to install the corresponding stabilizers before
installing equipment into the rack, it may cause the cabinet to tip over in some cases,
and thus may cause personal injury. Therefore, it is necessary to install stabilizers before
installing equipment into the rack. After installing the equipment and other components
into the rack, it can only pull out one component from the rack through its sliding part
at one time. Pulling out several components at the same time may lead the rack to turn
over and cause serious personal injury.
11. Please do not move the rack by oneself. Considering the height and weight of the rack,
at least two people are needed to complete its movement.
12. Please do not directly touch the copper busbar when the rack is powered on, and it is
prohibited to directly short-circuit the copper busbar.
13. This is Grade A product, and in the living environment, it may cause radio interference.
In such case, users may need to take measures to deal with the interference.
Note: The following considerations can help avoid the occurrence of problems that may
damage the components or cause data loss, etc.
1. In case of the following cases, please unplug the power line plug from the power socket
and contact customer service department of Inspur:
２