Inspur NX5460M4 User Manual page 43

Take Boot option #1 as an example, set the first boot device: move the cursor to Boot
option #1, press enter, the options will pop up: UEFI:Built-in EFI Shell, IBA GE slot 0400
v1553, SATA0 P2: ST9250610NS, etc., select one through the up & down key, such as, IBA
GE slot 0400 v1553, press Enter, and the selected network is the first boot option.
3.2.7 Save & Exit
Save & Exit interface is used to save parameter changes and exit BIOS setup, as shown
below:
４０