ADF Web HD67839 Series User Manual page 55

Industrial Electronic Devices
Setting new Power ON value
This command is used to program the Power ON value in the DALI devices.
REQUEST
S_PON_id_val
(ASCII format)
Where:
'id' = ID of the DALI node (0 ÷ 63) or group (64 ÷ 79) or broadcast (80).
'val' = value of new power ON value to set (0 ÷ FF, Hex representation)
Note:
Just 'id' and 'val' are variables, the rest of the ASCII string is fixed.
Setting new Fail Power value
This command is used to program the new Fail Power value in the DALI devices.
REQUEST
S_FAI_id_val
(ASCII format)
Where:
'id' = ID of the DALI node (0 ÷ 63) or group (64 ÷ 79) or broadcast (80).
'val' = value of new Fail Power value to set (0 ÷ FF, Hex representation)
Note:
Just 'id' and 'val' are variables, the rest of the ASCII string is fixed.
ADFweb.com Srl – IT31010 – Mareno – Treviso
User Manual DALI / Ethernet
Document code: MN67839_ENG
INFO: www.adfweb.com Phone +39.0438.30.91.31
Revision 1.001 Pagina 55 di 62