ADF Web HD67839 Series User Manual page 26

Industrial Electronic Devices
G :
ROUPS
The means of the fields for the "CONTROL COMMANDS"
section are:
In the "POWER CONTROL" bar it is possible to
change the actual ADV of the selected DALI group;
In the field "COMMAND" it is possible to select a
DALI command to send to the selected DALI
group. For set commands, it is possible to insert
the value to set in the field "xx". As soon as the
command to send is selected, the command is
sent: in order to send the same command more
times, it is possible to press the "SEND" button;
In the field "COMMAND
from the DALI group is printed.
Note:
This section is used to test the functioning of the
DALI groups in the network.
In the "SET SCENES" section it is possible to activate the
programmed scenes to the selected group:
By pressing the buttons
possible to activate the correspondent scene inside
the selected DALI group.
ADFweb.com Srl – IT31010 – Mareno – Treviso
FEEDBACK" the response
"GO TO: SCENE X" it is
Figure 12: "Groups settings" window
User Manual DALI / Ethernet
Document code: MN67839_ENG
INFO: www.adfweb.com Phone +39.0438.30.91.31
Revision 1.001 Pagina 26 di 62