ADF Web HD67839 Series User Manual page 45

Industrial Electronic Devices
Scene Programming
This commands are used to program the scenes inside the DALI nodes. It is necessary to send two consecutive commands for the
programming.
REQUEST 1
REQUEST 2
ADFweb.com Srl – IT31010 – Mareno – Treviso
Byte Number Description
1 0x00
2 0x10
3 0x00
4 0x00
5 0x00
6 0x02
7 0x04
8 Counter (increased for every command) (Hex)
9 0xD1
10 ADV (Hex)
11 0x00
Byte Number Description
1 0x00
2 0x10
3 0x00
4 0x00
5 0x00
6 0x02
7 0x04
8 Counter (increased for every command) (Hex)
9 DALI ID + 0x80 (Hex)
10 Scene Number + 0x40 (Hex)
11 0x00
User Manual DALI / Ethernet
Document code: MN67839_ENG
INFO: www.adfweb.com Phone +39.0438.30.91.31
Revision 1.001 Pagina 45 di 62