Industrial Electronic Devices
DALI SCI4:
This set of simple ASCII commands allows to send DALI commands for controlling and reading DALI devices and to program the network.
Getting data from DALI node
This command is used to read a specific DALI node in the network.
REQUEST
I_BAL_ch_00
(ASCII format)
Where:
'ch' = ID of the DALI ballast to read (0 ÷ 63)
Note:
Just 'ch' is variable, the rest of the ASCII string is fixed.
RESPONSE
CHANNEL ch \r\n
ADV=val \r\n
TYPE=typ \r\n
ANSWER=rs \r\n
MIN=min \r\n
MAX=max \r\n
GRP1=g1 \r\n
GRP2=g2 \r\n
SCENES=scn
(ASCII format)
ADFweb.com Srl – IT31010 – Mareno – Treviso
User Manual DALI / Ethernet
Document code: MN67839_ENG
INFO:
www.adfweb.com
Phone +39.0438.30.91.31
Revision 1.001
Pagina 50 di 62