YASKAWA DX200 Instructions Manual page 26

3 Operation Procedure
3.3 Operation for Creating Fitting JOB
3. Click the {Receive} button. The force condition data of the selected
No. is received from the force condition file in DX200/FS100. The
received data is output to the force condition file data in the right part of
the screen.
4. Maximum 24 force condition files can be set. In order to differentiate
them, use the comment box if needed. Input a comment freely
(Maximum 32 alphanumerical characters).
3-9
HW1481731
HW1481731
26/104