YASKAWA DX200 Instructions Manual page 36

3 Operation Procedure
3.3 Operation for Creating Fitting JOB
– During the adjustment operation, the [RUNNING] LED on the I/F
Panel turns ON. To stop the operation such as when changing the
adjustment condition, press the {STOP} button. To resume the
adjustment, first return to the start position, and execute the
operation. For the emergency stop, release the enable switch. The
Tuning Step 2 and MotoFit execution follows the same operation
described as above.
– When the adjustment operation completes, the [TUNESTEP1
COMP SET] LED and the [RUNNING] LED turn OFF.
3-19
HW1481731
HW1481731
36/104