YASKAWA DX200 Instructions Manual page 20

3 Operation Procedure
3.2 Setting the IP address
*Below is the procedure for Windows 7.For other OSs, please refer to the
general setting method of the IP address from external document.
2. Change the PC's IP address so that the robot controller and the PC
are in the same network.
Select [Start] - [Control Panel] - [Network and Sharing Center] -
[Change adapter settings].
In case items to be selected are difficult to find, select "Small Icon" to
change the icon display.
3. From the adapter setting change item, find a port to which Ethernet
cable is connected and right-click it. The property window opens.
3-3
HW1481731
HW1481731
20/104