YASKAWA DX200 Instructions Manual page 8

Description of the Operation Procedure
Registered Trademark
Descriptions of the programming pendant keys, buttons, displays and
keyboard of the PC are shown as follows:
Equipment
Programming Character Keys The keys which have characters printed on
Pendant
Symbol Keys
Axis Keys
Numeric Keys
Keys Pressed
Simultaneously
Mode Key
Button
Displays
PC Keyboard
In the explanation of the operation procedure, the expression "Select • • • "
means that the cursor is moved to the object item and [SELECT] is
pressed.
In this manual, names of companies, corporations, or products are
trademarks, registered trademarks, or brand names for each company or
corporation. The indications of (R) and TM are omitted.
viii
Manual Designation
them are denoted with [ ].
e.g. [ENTER]
The keys which have a symbol printed on them
are not denoted with [ ] but depicted with a
small picture.
GO BACK
e.g. PAGE key
PAGE
The cursor key is an exception, and a picture is
not shown.
"Axis keys" and "Numeric keys" are generic
names for the keys for axis operation and
number input.
When two keys are to be pressed
simultaneously, the keys are shown with a "+"
sign between them.
e.g. SHIFT key + COORD key
SHIFT
Three kinds of modes that can be selected by
the mode key are denoted as follows:
REMOTE, PLAY, or TEACH
Three buttons on the upper side of the
programming pendant are denoted as follows:
HOLD button
START button
EMERGENCY STOP button
The menu displayed in the programming
pendant is denoted with { }.
e.g. {JOB}
The name of the key is denoted.
e.g. Ctrl key on the keyboard
HW1481731
HW1481731
TOOL SEL
COORD
8/104