Vnx5300 Block And File Product Description - EMC VNX Series Hardware Information Manual

VNX5300 Block and File product description

VNX5300 Block and File product description
Front view
6 EMC VNX5300 Hardware Information Guide
This section shows an example of the front and rear views of a Block and File (Unified)
VNX5300 platform.
Note: A fully configured Unified VNX5300 platform includes up to seven 3U DAEs (a
maximum of 120 3.5-inch disk drives) or up to four 2U DAEs (a maximum of 125 2.5-inch
disk drives).
Figure 2 shows an example of the front view of a Block and File (Unified) VNX5300
platform having a dual 1U SPS, a 3U, 15 (3.5-inch) disk drive 3U DPE, two 1U Control
Stations (one optional), and one 2U Data Mover Enclosure with two Data Movers
Data Mover includes two power supply/cooling (fan) modules and one CPU module.
AC
DVD
DVD
Figure 2 Example of a Block and File VNX5300 (Unified) platform with a 3U, 15 DPE (front view)
Note: Figure 2 and Figure 3 on page 7
platform (front and rear views). These figures are example of what a Block and File
(Unified) VNX5300 platform looks like and are for illustrative purposes only.
2. The term Data Mover is used throughout this guide. The term Data Mover is also referred to as a
blade. These terms are interchangeable and mean the same thing.
AC
AC
are examples of a Block and File (Unified) VNX5300
2
. Each
AC
Data Mover
Enclosure 0
Control Station 1
(optional)
Control Station 0
3U, 15 (3.5-inch)
disk processor
enclosure (DPE)
SPS
VNX-000562