EMC VNX Series Hardware Information Manual page 18

System component description
DME front view
18 EMC VNX5300 Hardware Information Guide
The front of the Block and File (Unified) VNX5300 platform, the 2U DME contains two
enclosure status (power and fault) LEDs
Note: Figure 8 is an example of a Block and File (Unified) VNX5300 platform 2U DME with
four power supply/cooling (fan) modules and two CPU modules installed.
Data Mover enclosure
AC
Figure 8 Data Mover enclosure LEDs
Table 6 describes the 2U DME power and fault LEDs.
Table 6 Data Mover Enclosure LEDs
LED Color State
Power Blue On
— Off
Fault Amber On
— Off
(Figure 8).
Data Mover enclosure
fault LED
AC
Description
DME is powered up and all the components in the enclosure
are operating properly
DME is powered down.
A replaceable component failed within the enclosure.
DME operating normally.
power LED
AC AC
CNS-001667