Front View; Vnx5500 Block And File Platform Stackup - EMC VNX5500 Parts Location Manual

VNX5500 Block and File platform stackup

VNX5500 Block and File platform stackup

Front view

4 EMC VNX5500 Parts Location Guide
For server-related tasks, go to the Server tasks for the VNX5300, VNX5500, VNX5700,
◆
and VNX7500 section, and then select the appropriate heading. For example, to
download a PDF copy of Adding or replacing hardware, go to Add or replace hardware
and follow the steps in the wizard.
The Block and File VNX5500 platform comprises a 1U standby power supply (SPS), 3U
disk processor enclosure (DPE), 1U Control Station and 2U Data Mover enclosures.
Note: Throughout this guide, figure references are placed in the Part number label location
heading of tables because some of the tables have part number locations, as described in
Table 4 on page 12 and some do not, as described in
format is used throughout this guide.
On the front, viewing from top to bottom, a Block and File VNX5500 platform includes the
following hardware:
One to two 2U Data Mover enclosures with one, two, or three Data Movers
◆
One to two 1U Control Stations
◆
One 3U DPE chassis with either a:
◆
• 15 (3.5-inch) disk drives (hot-swappable)
or,
• 25 (2.5-inch) disk drives (hot-swappable)
One dual 1U standby power supply (SPS)
◆
Figure 1 on page 5 shows an example of the front of a Block and File VNX5500 with a 3U,
15 (3.5-inch) DPE.
Table 1 on page 9, for example. This