Control Station rear view
For a full description of the I/O module types used in the SP, go
page
46.
On the rear, viewing from left to right, the Block and File (Unified) VNX5300 platform 1U
Control Station includes the following hardware components:
AC power in connector
◆
Two PS/2 connectors (keyboard and mouse)—not used
◆
One (DB-9 plug) serial modem connector
◆
One (DB-15) video (VGA socket) connector—not used
◆
Four (RJ-45) NIC (labeled A, CS, B, and MGMT) connectors
◆
Note: The RJ-45 NICs (labeled A and CS) are integrated into the rear of the 1U Control
Station while the RJ-45 NICs (labeled B and MGMT) are on a PCI-e card in the
expansion slot on the rear of the 1U Control Station.
One (DB-9 plug) serial console (RS-232/EIA-232) connector
◆
Two USB 2.0 connectors—not used
◆
POST diagnostic LEDs
◆
Two CAT-5E/6 panel-mount Ethernet cable extensions
◆
System component description
to"I/O modules" on
EMC VNX5300 Hardware Information Guide
37