EMC VNX Series Hardware Information Manual page 13

Figure 4 shows the location of these disk drives and Status LEDs.
1
1 3.5-inch 6-Gb/s SAS drives or 6-Gb/s
NL-SAS disk drives
2 DPE fault LED (amber)
3 DPE power on LED (blue)
Figure 4 VNX5300 platform 3U, 15 DPE carrier (front view)
Table 2 describes the Block and File (Unified) VNX5300 platform 3U, 15 DPE and the disk
drive status LEDs.
Table 2 VNX5300 platform 3U, 15 DPE and disk drive LEDs
LED
DPE fault (location 2)
DPE power (location 3)
Disk drive fault (location 4)
2
4 Disk drive fault LED (amber)
5 Disk drive on/activity LED (green)
Color State
Amber On
Green On
Blue On
— Off
Amber On
— Off
EMC VNX5300 Hardware Information Guide
System component description
3
5 4
Description
Fault has occurred
Note: LED is always on at
powerup, until it is initialized.
Powering and powered up with
backend bus running at 2 Gb/s
Powering and powered up with
backend bus running at 6Gb/s
Powered down
Fault has occurred
No fault has occurred
VNX-000103
13