EMC VNX Series Hardware Information Manual page 52

I/O modules
Two-port 10-Gb/s optical or active Twinax Fibre Channel over Ethernet (FCoE) I/O module
52 EMC VNX5300 Hardware Information Guide
Table 30 Two-port 10-Gb/s optical I/O module LEDs
LED Color State
Power/Fault Green On
Amber On
— Off
Link Green On
— Off
Activity Amber Blinking
— Off
The two-port 10-Gb/s optical or active Twinax
the latch handle) comes with two FCoE ports, one power/fault LED, and a link and activity
LED for each port, as shown in
speeds up to 10 Gb/s for Fibre Channel over Ethernet networks. The two-port 10-Gb/s
FCoE I/O module uses the SFP transceiver module. For part number label location, see the
VNX5300 Parts Location Guide
1 2
3
4
5
CNS-001756
1 Push button latch handle
2 Power/fault LED
3 SFP+ (optical) port (two)
Figure 46 Two-port 10-Gb/s FCoE I/O module
8. The FCoE I/O module can also use active twinaxial (Twinax) cables. Twinax is a type of cable
similar to coax, but with two inner conductors instead of one. These cables will be supplied in lieu
of the SFP+ when so ordered.
Description
I/O module is powered up.
I/O module has faulted.
I/O module is powered down.
Network connection
No network connection
Transmit/receive activity
No activity
8
FCoE I/O module (labeled 10 GbE/FCoE on
Figure 46. The ports on this I/O module can interface at
.
4 SFP+ link LED (right)
5 SFP+ activity LED (left)