Control Station front view
Table 3
describes the Block and File (Unified) VNX5300 platform 3U, 25 DPE and disk
drive status LEDs.
Table 3 VNX5300 platform 3U, 25 DPE and disk drive status LEDs
LED
DPE fault (location 2)
DPE power (location 3)
Disk drive fault (location 4)
Disk drive on/activity
(location 5)
On the front, the Block and File (Unified) VNX5300 platform 1U Control Station includes
the following:
DVD-ROM drive
◆
USB 2.0 connector (not used)
◆
Control switch and status LEDs
◆
Figure 6
shows the orientation of these components.
1
DVD
1
DVD-ROM drive
2
Control Station switch and status LEDs (for
a closer view, see
Figure 7 on page
Figure 6 VNX5300 platform Control Station (front view)
Color
State
Amber
On
Blue
On
—
Off
Amber
On
—
Off
Blue
On
Blinking
3
2
3
USB 2.0 connector (not used)
16)
EMC VNX5300 Hardware Information Guide
System component description
Description
Fault has occurred
Powering and powered up
Powered down
Fault has occurred
No fault has occurred
Powering and powered up
Disk drive activity
CNS-001740
15