EMC VNX Series Hardware Information Manual page 36

System component description
36 EMC VNX5300 Hardware Information Guide
Table 20 lists the SP serial RS-232/EIA 232 (micro DB-9) pin signals used on the
connector.
Table 20 Serial RS-232/EIA 232 (micro DB-9) connector (socket) pinout
DB-9 Pin Signal
1 CD
2 RXD
3 TXD
4 DTR
5 GND
6 DSR
7 RTS
8 CTS
9 RI
SP I/O module slots
Two SP PCI Gen 2 x4 I/O module slots are available. These slots support the following I/O
modules (Figure 29):
Two-port 10-Gb/s optical or active Twinax (w/iSCSI protocol)
◆
Four-port 1-Gb/s copper iSCSI
◆
Four-port 8-Gb/s optical Fibre Channel (running at 2, 4, or 8-Gb/s)
◆
Two-port 10-Gb/s optical or active Twinax Fibre Channel over Ethernet (FCoE)
◆
2 3
Figure 29 Example of SP with a Fibre Channel (FC) I/O module and an iSCSI I/O module
Description
Carrier detect
Received data
Transmitted data
Data terminal ready
Ground
Data set ready
Clear to send
Request to send
Ring indicator
SP I/O Module Slots
PART NUMBER
REV A09 A
8Gb
6Gb
fibre SAS
1
X4
5
4
PART NUMBER
REV A09 A
6Gb SAS
0 X4
VNX-000569