iSCSI protocol, hence the required SFP+ transceiver module uses a different part number
(for part number label location, see the
also includes a TCP offload engine (or TOE).
1
2
3
4
5
CNS-001756
1
Push button latch handle
2
Power/fault LED
3
SFP+ (optical) port (two)
Figure 44 Two-port 10-Gb/s optical I/O module
Two-port 10-Gb/s optical I/O module LEDs
The two-port 10-Gb/s optical I/O module has three types of status LEDs.
the LEDs and
Table 30 on page 52
Power/fault LED
Link LED
Activity LED
Link LED
Activity LED
Figure 45 Two-port 10-Gb/s optical I/O module LEDs
VNX5300 Parts Location Guide
4
SFP+ link LED (right)
5
SFP+ NIC activity LED (left)
describes them.
CNS-001672
EMC VNX5300 Hardware Information Guide
I/O modules
). This I/O module
Figure 45
shows
51