How Record Status Affects The Sending Operations; Changing Record Status - Cardiac Science Eclipse Premier Operating Instructions Manual

How record status affects the sending operations

Changing Record Status

070-1149-01 B
NOTE: For the list of status codes, see "Record Status" on pg. 7-2.
Record status affects whether records can be sent from the Eclipse Premier. The
following rules apply:
Records with status Dm can not be sent.
●
Records with status Rv can not be sent.
●
In general, the following records will automatically be sent when BATCH SEND
ECGS is selected in the DIRECTORY menu: records with the status ECG; records
with the status ECG and Pr; records with the status RtE; and records with the status
RtE and Pr. The following rules also apply:
Records with status St or Rq will not be sent when BATCH SEND ECGS
●
is selected in the DIRECTORY menu. These records may be sent
individually from the Single ECG Functions list.
Records with status, No, will not be sent when BATCH SEND ECGS is
●
selected in the DIRECTORY menu. These records may be sent
individually from the Single ECG Functions list.
Patient records can be marked so that they are automatically sent when BATCH SEND
ECGS is selected in the DIRECTORY menu. Similarly, patient record status can be
changed to ensure that a record is not sent.
Mark Record as "SEND"
To ensure that a record is sent the next time BATCH SEND ECGS is selected, select
the MARK RECORD AS "SEND" from the Single ECG Functions list.
1. Follow the instructions for accessing the list of patient files (see
"Using the DIRECTORY Menu" on pg. 7-1).
2. Locate the desired patient file, highlight it and press the Enter key. The
Single ECG Functions list is displayed.
3. Select MARK RECORD AS "SEND" from the Single ECG Functions
list
4. If the record has been sent previously, then the status of St is removed
from that record. The file will be sent the next time BATCH SEND
ECGS is selected.
How record status affects the sending operations
Eclipse Operating Instructions
8-3