Cardiac Science Eclipse Premier Operating Instructions Manual page 48

Chapter 4
System Setup and User Setup
Password
Directory Password
4-14
Eclipse Operating Instructions
[Up to 15 alphanumeric characters]
NOTE: The password field will not appear in the MISCELLANEOUS menu if the
password is set to OFF in SYSTEM SETUP.
NOTE: Write down the password and keep it in a secure place. You will be able to
change or remove the password protection only after you have entered the correct
password.
Determines the password required to access the USER SETUP menus and the
SYSTEM SETUP menu. This field is enabled in the SYSTEM SETUP menu [see
"Password" on pg. 4-5].
[Up to 15 alphanumeric characters]
NOTE: The directory password field will not appear in the MISCELLANEOUS
menu if the directory password is set to OFF in SYSTEM SETUP.
NOTE: Write down the password and keep it in a secure place. You will be able to
change or remove the password protection only after you have entered the correct
password.
Determines the password required to access the directory. This field is enabled in
the SYSTEM SETUP menu (see "Directory Password" on pg. 4-6). Once you have
set the password, enable and set the administrator password to prevent users from
viewing the directory password; for more information, see "Password" on pg. 4-5.
ENABLING PATIENT DEMOGRAPHIC FIELDS
NOTE: This menu will not be available if the Eclipse Premier is
configured to use Custom Header in conjunction with an ECG
Management System, such as the PYRAMIS System or the FAA
System.
This final USER SETUP menu determines which patient demographic fields appear in
the EDIT ID menu. An asterisk ( * ) indicates that information in these fields directly
affects ECG waveform analysis.
To ensure that a field does NOT appear in the EDIT ID menu, the field setting should
be "OFF". Otherwise, select "ON," "ON, CLEAR" or "ON, HOLD" to make each
demographic field appear in the EDIT ID menu; these fields also appear on printouts.
Select "ON, HOLD" if you want every patient file to have the same
●
information in this field. Until the information is typed over, the EDIT ID
menu will keep the information in these fields even if the Eclipse Premier
is turned off. For example, you may want every patient record to be labeled
with the same Department name.
"ON" and "ON, CLEAR" act the same. Fields with this setting are cleared
●
for every new patient or when the unit returns to Standby mode.
070-1149-01 B