Cardiac Science Eclipse Premier Operating Instructions Manual page 117

070-1149-01 B
Recommended Separation Distances
Refer to the following table for recommended separation distances between the Eclipse
Premier and portable and mobile RF communications equipment.
The Eclipse Premier is intended for use in an electromagnetic environment in which
radiated RF disturbances are controlled. The user of the Eclipse Premier can help
prevent electromagnetic interference by maintaining a minimum distance between
portable and mobile RF communications equipment (transmitters) and the Eclipse
Premier as recommended below, according to the maximum output power of the
communications equipment.
Rated maximum output
power of transmitter
W
0,01
0,1
1
10
100
For transmitters rated at a maximum output power not listed above, the recommended
separation distance d in metres (m) can be estimated using the equation applicable to the
frequency of the transmitter, where P is the maximum output power rating of the transmitter in
watts (W) according to the transmitter manufacturer.
NOTE1: At 80 MHz and 800 MHz, the separation distance for the higher frequency range
applies.
NOTE 2: These guidelines may not apply in all situations. Electromagnetic propagation is
affected by absorption and reflection from structures, objects and people.
Separation distance according to frequency of transmitter
150 kHz to 80 MHz 80 MHz to 800 MHz
d = 1.2 √ P
0,12
0,38
1,2
3,8
12
EMC Declaration Tables
800 MHz to 2,5 GHz
d = 1.2 √ P d = 2.3 √ P
0,12 0,23
0,38 0,73
1,2
3,8
12
Eclipse Operating Instructions
2,3
7,3
23
11-9