Acquire Printout Of Eclipse Premier Program Settings - Cardiac Science Eclipse Premier Operating Instructions Manual

Acquire Printout of Eclipse Premier Program Settings

070-1149-01 B
1. Press the On/Standby key to power up to the PREVIEW screen.
2. Press the "M" key to go to the MAIN MENU.
3. Select SYSTEM SETUP by pressing the "S" key. The SYSTEM
SETUP menu will appear (see Figure 4-1 on pg. 4-1).
4. Press the down arrow key to highlight the Connection field and select
the appropriate choice: either MODEM, DIRECT or 802.11b.
5. If you are using a remote connection (through a modem), verify that
the Phone # and Description fields are correctly filled in.
6. Press the left arrow key to return to the MAIN MENU.
7. Press the "H" key to go to the GET CUSTOM HEADER menu.
8. Receive a list of available Custom Headers by selecting GET
CUSTOM HEADER LIST.
9. Highlight the desired Custom Header and press the Enter key to select
it. The word "SELECT" is displayed.
NOTE: Pressing Enter will also deselect a selection.
10. Press the left arrow key to return to the GET CUSTOM HEADER
menu.
11. Press the "G" key to receive the Custom Header and automatically
configure the Eclipse Premier to use those patient demographic fields.
Program settings include all settings configured in the SYSTEM SETUP menu and in
the USER SETUP menus.
NOTE: Please see "Print Setup Report" on pg. 9-2 for examples
which were printed using settings configured at the factory (factory
defaults).
1. Press the On/Standby key to power up to the PREVIEW screen.
2. Press the "M" key to go to the MAIN MENU.
3. Press the "P" key to print the list.
Press the left arrow key to return to the PREVIEW screen.
Acquire Printout of Eclipse Premier Program Settings
Eclipse Operating Instructions
4-17