Chrysler 300M 2002 Service Manual page 1502

LH
CARPETS
REMOVAL
(1) Remove floor mats.
(2) Remove door sill trim covers.
(3) Remove cowl side trim covers.
(4) Remove front seats.
(5) Remove bolts attaching front seat belt lower
anchors to floor below B-pillar trim panels.
(6) Remove center console, if equipped.
(7) Remove rear seat cushion.
(8) Remove gas pedal bracket.
(9) Remove carpet fasteners.
(10) Remove carpet from vehicle (Fig. 6).
INSTALLATION
(1) Place carpet in proper position on floor of vehi-
cle.
(2) Install carpet fasteners.
(3) Using double back tape or hook and loop,
secure carpet strap behind the instrument panel cen-
ter support bracket.
(4) Install cowl side trim covers.
(5) Install door sill trim covers.
(6) Install rear seat cushion.
(7) Install gas pedal bracket.
(8) Install center console, if equipped.
(9) Install bolts to attach seat belt lower anchors
to floor below B-pillar trim panels.
(10) Install front seats.
(11) Install floor mats.
Fig. 6 FLOOR CARPET
1 - REAR SEAT HOLDDOWN CUPS
2 - FLOOR CARPET
3 - FLOOR
CENTER CONSOLE ARMREST
LID ASSEMBLY
REMOVAL
(1) Open armrest lid.
(2) Remove lid attaching screws.
(3) Remove lid from console.
INSTALLATION
(1) Place lid in position.
(2) Install screws attaching lid to console.
(3) Check operation of lid.
INTERIOR 23 - 63