Chrysler 300M 2002 Service Manual page 1501

23 - 62 INTERIOR
CROSS CAR BEAM
REMOVAL
(1) Remove steering column and instrument panel
from vehicle.
(2) Remove fasteners attaching cross car beam to
plenum in both locations (Fig. 5).
(3) Remove left side fasteners attaching the cross
car beam to cowl side panel.
(4) Remove right side fasteners attaching the cross
car beam to cowl side panel.
(5) Remove cross car beam from vehicle.
INSTALLATION
(1) Place cross car beam in position in vehicle.
(2) Install right side fasteners attaching the cross
car beam to cowl side panels.
(3) Install left side fasteners attaching the cross
car beam to cowl side panels.
(4) Install fasteners to plenum in both locations.
(5) Install steering column and instrument panel.
Fig. 5 CROSS CAR BEAM
LH