Chrysler 300M 2002 Service Manual page 1369

21 - 120 TRANSAXLE
INPUT CLUTCH ASSEMBLY (Continued)
(22) Install OD reaction plate waved snap ring
(Fig. 310).
Fig. 310 Install Waved Snap Ring
1 - OVERDRIVE REACTION PLATE WAVED SNAP RING
2 - SCREWDRIVER
(23) Install the OD/Reverse reaction plate with
large step down (towards OD clutch pack) (Fig. 311).
Fig. 311 OD/Reverse Reaction Plate
1 - OVERDRIVE/REVERSE PRESSURE PLATE
2 - (STEP SIDE DOWN)
(24) Install OD reaction plate flat snap ring (Fig.
312).
Fig. 312 Install Flat Snap Ring
1 - ARBOR PRESS RAM
2 - TOOL 5059A
3 - FLAT SNAP RING
(25) Measure OD clutch pack clearance. Set up
dial indicator on top of the OD/Reverse reaction plate
as shown in (Fig. 313).
Fig. 313 Measure OD Clutch Pack Clearance
1 - DIAL INDICATOR
2 - OD/REVERSE PRESSURE PLATE
LH