Gadget Ii - ETC Desire XTI Series User Manual

Gadget II

Gadget II provides a connection from a PC to your lighting system's DMX/RDM devices. Gadget II
provides DMX control level output, configuration, and monitoring for RDM devices including fixtures,
dimmers, and more. You can also upgrade software for most DMX-based ETC products using
UpdaterAtor or Net3
Prior to connecting Gadget II, start the RDM configuration tool and apply power to the fixtures.
For detailed information, see the
Connect Gadget II to a PC and the DMX/RDM network
1. Connect the USB cable to the PC and the mini USB to Gadget II.
2. Connect the DMX cable to Gadget II.
3. Connect the other end of the DMX cable to the DMX/RDM network jack.
Figure-4.2 Gadget II architecture.
DMX/RDM Gateway
Also see
28
™
Concert software.
Gadget II USB to DMX/RDM Interface Setup Guide.
Computer with Net3 Concert
or UpdaterAtor
USB cable
Gadget II
To DMX/RDM device
To DMX/RDM device
To DMX/RDM device
page 29
on .
Desire D40/D60 XTI v1.8.2 User Manual