Volkswagen Golf 1999 Service Manual page 492

DTC table: SAE P1 codes
DTC code
SAE VAG
P1335 17743 Engine torque monitor 2
Control limit exceeded
P1336 17744 Engine torque monitor
Control limit surpassed
P1337 17745 Bank 1, Camshaft Position
(CMP) Sensor -G40-
Short to Ground (GND)
P1338 17746 Bank 1, Camshaft Position
(CMP) Sensor -G40-
Open circuit/Short to positive
P1340 17748 Camshaft position/crankshaft
position sensor
Wrong allocation
P1347 17755 Bank 2, Camshaft
position/crankshaft position
sensor
Wrong allocation
1)
If this malfunction occurs the Motronic Engine Control Module (ECM) -J220- switches
on the Electronic Power Control (EPC) Warning Light -K132- in the instrument cluster.
Significance of Electronic Power Control (EPC) Warning Light -K132-
http://ebahn.bentleypublishers.com/vw/servlet/Display?action=Next&type=repair&id=...
DTC text
1)
Corrective action
- Check Intake Air Temperature (IAT)
sensor -G42- Page 24-81
- Check Mass Air Flow (MAF) Sensor
-G70- Page 24-52
- Check Engine Coolant Temperature
(ECT) sensor -G62-
- Check Camshaft Position (CMP)
Sensor -G40- Page 28-16
- Check Camshaft Position (CMP)
Sensor -G40- Page 28-16
- Check engine speed sensor
Page 24-93
- Check timing:
Repair Manual, 2.8 Liter VR6 4V
Engine Mechanical, Engine Code(s):
BDF; Repair Group 15
Página 18 de 41
01-74
Page 24-69
Page 01-3 .
12/2/2005