Volkswagen Golf 1999 Service Manual page 530

Output Diagnosis Test Mode (DTM)
Output Diagnosis Test Mode was aborted
Output Diagnosis Test Mode was aborted
http://ebahn.bentleypublishers.com/vw/servlet/Display?action=Goto&type=repair&id=...
Indicated on display:
- Switch off ignition.
- Replace Secondary Air Injection
(AIR) Solenoid Valve -N112-:
Repair Manual, 2.8 Liter VR6 4V
Engine Mechanical, Engine Code(s):
BDF; Repair Group 26
- Check DTC memory, repair
Diagnostic Trouble Codes (DTCs)
if necessary and then erase DTC
memory Page 01-23
memory, checking and erasing.
- Read readiness code
146 . If the DTC memory has
been erased or the Motronic
Engine Control Module (ECM) -
J220- was disconnected from
battery (B+) positive, the
readiness code must be
generated again
LED does not flash:
- Press -C- button to abort output
Diagnosis Test Mode (DTM).
Indicated on display:
- Switch off ignition.
- Remove wiper arms and cowl
panel:
Repair Manual, Electrical
Equipment; Repair Group 92
Página 13 de 45
01-112
, DTC
Page 01-
Page 01-149 .
12/2/2005