Volkswagen Golf 1999 Service Manual page 787

1.8 l turbo, 1.9 l tdi and pdi diesel. 2.0l gasoline, 2.8l vr6

Hide thumbs Also See for Golf 1999:

Table of Contents

Components, checking

http://ebahn.bentleypublishers.com/vw/servlet/Display?action=Next&type=repair&id=...

- Check wiring for open circuit

between test box and 6-pin

connector according to Electrical

Wiring Diagrams. Terminal 4 and

Wire resistance: max. 1.5

If the specification is obtained:

- Check wire for open circuit

between 6-pin connector terminal

3 and Fuel Pump (FP) -J17-

referring to Electrical Wiring

Wire resistance: max. 1.5

If no wiring malfunction is detected:

- Replace Motronic Engine Control

Module (ECM) -J220-

- Check DTC memory, repair

malfunctions if necessary and

then erase DTC memory

- Erase learned values and adapt

Motronic Engine Control Module

(ECM) -J220- again

- Read readiness code

. If DTC memory has been

erased or Motronic Engine

Control Module (ECM) -J220- was

disconnected from battery

positive (B+), readiness code

must be generated again

Página 7 de 87

Show Quick Links

Chapters

Table of Contents