Components, checking
http://ebahn.bentleypublishers.com/vw/servlet/Display?action=Next&type=repair&id=...
Checking activation and voltage
supply
- Connect VAG 1527 LED test light
to connector terminals of fuel
injector to be tested using cables
from VAG 1594.
- Operate starter and check
activation for fuel injector.
LED must flicker
- Switch off ignition.
The LED does not flicker:
- Remove wiper arms and cowl
panel:
Repair Manual, Electrical
Equipment; Repair Group 92
- Connect VAG 1598/31 test box to
control module wiring harness.
Engine Control Module (ECM) -
J220- remains disconnected.
Página 64 de 87
24-101
12/2/2005