Volkswagen Golf 1999 Service Manual page 442

DTC memory
Rapid data transfer
DTC memory is erased!
Rapid data transfer
Select function XX
http://ebahn.bentleypublishers.com/vw/servlet/Display?action=Next&type=repair&id=...
- Press buttons -0- and -5- for the function "Erase
DTC memory" and confirm entry with -Q- button.
Indicated on display:
Note:
If the ignition is switched off between "Check DTC
memory" and "Erase DTC memory" the DTC
memory will not be erased.
- Press
Indicated on display:
HELP
- Press buttons -0- and -6- for the function "End
output" and confirm entry with -Q- button.
Repair Diagnostic Trouble Codes (DTCs) printed
out using DTC table:
- Read readiness code
DTC memory has been erased or the Motronic
Engine Control Module (ECM) -J220- was
disconnected from battery (B+) positive, the
readiness code must be generated again
Page 01-149
-button.
SAE P0 codes Page 01-30
SAE P1 codes Page 01-58
SAE P2 codes Page 01-98
SAE P3 codes Page 01-99
.
Página 4 de 7
01-26
,
,
,
.
Page 01-146 . If the
12/2/2005