Cylinder head, servicing
http://ebahn.bentleypublishers.com/vw/servlet/Display?action=Next&type=repair&id=...
Conditions
The engine must only be warm to the touch.
Removing
CAUTION!
When performing repair work, especially due
to the confined conditions in the engine
compartment, pay attention to the following:
Route all types of lines (e.g. for fuel,
hydraulics, EVAP system, coolant,
refrigerant, brake fluid and vacuum) as well
as electrical wiring so that the original
positions are restored.
Ensure sufficient clearance to all moving or
hot components.
Note:
All cable ties which are opened or cut open when
removing engine, must be replaced in the same
position when installing the engine.
- Remove engine cover.
- Check whether a coded radio is installed. If so,
obtain anti-theft coding.
- With ignition switched off disconnect battery
Ground strap.
Página 33 de 58
15-26
12/2/2005