Ignition system, servicing
http://ebahn.bentleypublishers.com/vw/servlet/Display?action=Next&type=repair&id=...
Safety precautions
To prevent injuries to persons and/or damage to
the fuel injection and ignition system, the
following must be noted:
WARNING!
When performing repair work, especially due
to the confined conditions in the engine well,
pay attention to the following:
Route all types of lines (e.g. for fuel,
hydraulics, EVAPsystem, coolant,
refrigerant, brake fluid and vacuum) as well
as electrical wiring so that the original
positions are restored.
Ensure sufficient clearance to all moving or
hot components.
Do not touch or disconnect ignition wiring when
the engine is running or being turned at starter
speed.
The ignition must be switched off before
connecting or disconnecting fuel injection or
ignition system wiring or tester cables.
Página 19 de 51
28-12
12/2/2005