Components, checking
http://ebahn.bentleypublishers.com/vw/servlet/Display?action=Next&type=repair&id=...
- Press
button.
- Press buttons -0- and -6- for function "End
output" and confirm entry with -Q- button.
- Switch off ignition.
If the display does not indicate as described:
- Replace Engine Coolant Temperature (ECT)
sensor -G62- / Engine Coolant Temperature
(ECT) sensor -G2-
- Check DTC memory, repair malfunctions if
necessary and then erase DTC memory
01-23
.
- Read readiness code
memory has been erased or Motronic Engine
Control Module (ECM) -J220- was disconnected
from battery positive (B+), readiness code must
be generated again
Página 36 de 87
Page 24-16
, item 14 .
Page 01-146
. If DTC
Page 01-149
.
12/2/2005
24-73
Page