Volkswagen Golf 1999 Service Manual page 579

Readiness code
Basic setting
Input display group number XXX
System in basic setting 216
1 2
http://ebahn.bentleypublishers.com/vw/servlet/Display?action=Next&type=repair&id=...
3 4
Work step 8: Fuel supply system
diagnosis (part load)
Indicated on display:
- Press buttons -2-, -1- and -6- for
"Display group number 216" and
confirm entry with -Q- button.
Indicated on display: (1 to 4
display zones)
- Depress brake pedal and hold.
- Depress accelerator down to wide
open throttle position.
Engine speed will be increased by
Motronic Engine Control Module
(ECM) -J220- to approx. 2300
rpm.
- Depress brake pedal and
accelerator down until display
zone 4 displays (after approx. 75
seconds) specification
"xxxxx100".
- Release brake and accelerator
pedals.
If the display does not indicate as
described:
- Press
button.
Página 17 de 37
01-161
12/2/2005