Engine, removing and installing
http://ebahn.bentleypublishers.com/vw/servlet/Display?action=Next&type=repair&id=...
Notes on installation
Install in reverse sequence ; note the following
points:
- Check whether dowel sleeves for centering
engine/transmission are installed in cylinder
block and install if necessary.
Models with a manual transmission
- Check clutch and clutch operating mechanism
and install:
Repair Manual, 5 & 6 Spd. Manual
Transmission 02M, Repair Group 30
- Clean drive shaft splines and lightly grease with
G 000 100.
Models with an automatic transmission
- When securing torque converter to drive plate,
only use nuts which are authorized for this
purpose,
Parts catalog.
Página 13 de 22
10-13
12/2/2005