Volkswagen Golf 1999 Service Manual page 146

Cylinder head, servicing
http://ebahn.bentleypublishers.com/vw/servlet/Display?action=Next&type=repair&id=...
It must be possible to insert
camshaft bar T10068 into both
shaft slots.
Note:
If the cylinder head is removed:
Page 15-25 , Removing and
installing cylinder head.
- Place camshaft roller chain on
intermediate shaft chain sprocket.
- Guide chain between tensioning
rail and guide rail toward control
housing.
- First install intake camshaft timing
adjuster along with fitted camshaft
roller chain.
- Position both camshaft timing
adjusters (identification: 24E on
intakeside and 32A on exhaust
side) on the camshaft mountings
(arrows).
Página 51 de 58
15-44
12/2/2005