Volkswagen Golf 1999 Service Manual page 811

Components, checking
http://ebahn.bentleypublishers.com/vw/servlet/Display?action=Next&type=repair&id=...
- Additionally check wiring for short to one
another, to vehicle Ground(GND) and to battery
positive.
Specification:
If no wiring malfunction is detected:
- Check Motronic Engine Control Module (ECM) -
J220- voltage supply
- Check DTC memory, repair malfunctions if
necessary and then erase DTC memory
01-23 .
- Read readiness code
memory has been erased or Motronic Engine
Control Module (ECM) -J220- was disconnected
from battery positive (B+), readiness code must
be generated again
Página 31 de 87
Page 24-163 .
Page 01-146 . If DTC
Page 01-149 .
12/2/2005
24-68
Page