Components, checking
http://ebahn.bentleypublishers.com/vw/servlet/Display?action=Next&type=repair&id=...
- Switch off ignition.
If the display does not indicate as
described:
- Disconnect 6-pin connector from
Throttle Valve Control Module -
J338- (arrow).
Checking resistance
- Measure resistance from throttle
valve drive between terminals 3
and 5
Specification: 1.0 to 5.0
If the specification is not obtained:
- Replace Throttle Valve Control
Module -J338-
Page 24-13
item 6 .
- Check DTC memory, repair
malfunctions if necessary and
then erase DTC memory
01-23
.
- Adapt Motronic Engine Control
Module (ECM) -J220- to Throttle
Valve Control Module -J338-
Page 24-182
.
Página 27 de 87
24-64
,
Page
12/2/2005