Volkswagen Golf 1999 Service Manual page 835

Components, checking
http://ebahn.bentleypublishers.com/vw/servlet/Display?action=Next&type=repair&id=...
If there is no Diagnostic Trouble Code (DTC) in
the wiring and the resistance measurement
values are OK.:
- Replace Motronic Engine Control Module (ECM)
-J220- Page 24-173
- Check DTC memory, repair malfunctions if
necessary and then erase DTC memory
01-23 .
- Erase learned values and adapt Motronic
Engine Control Module (ECM) -J220- again
Page 24-182 .
- Read readiness code
memory has been erased or Motronic Engine
Control Module (ECM) -J220- was disconnected
from battery positive (B+), readiness code must
be generated again
Página 55 de 87
.
Page 01-146 . If DTC
Page 01-149 .
12/2/2005
24-92
Page