Volkswagen Golf 1999 Service Manual page 537

1.8 l turbo, 1.9 l tdi and pdi diesel. 2.0l gasoline, 2.8l vr6

Hide thumbs Also See for Golf 1999:

Table of Contents

Output Diagnosis Test Mode (DTM)

Output Diagnosis Test Mode was aborted

http://ebahn.bentleypublishers.com/vw/servlet/Display?action=Goto&type=repair&id=...

- Read readiness code

DTC memory has been erased or the Motronic

Engine Control Module (ECM) -J220- was

disconnected from battery (B+) positive, the

readiness code must be generated again

If the LED does not flash and the Secondary

Air Injection (AIR) Pump Relay does not

- Press -C- button to abort output Diagnosis Test

Indicated on display:

- Switch off ignition.

- Pull Secondary Air Injection (AIR) Pump Relay

1- out of relay carrier in protective housing for

control modules.

If tools are necessary to pull relays or control

modules out of the relay plate, first disconnect

battery Ground (GND) strap.

Before disconnecting battery Ground (GND)

strap obtain code for radios with anti-theft

Página 20 de 45

Show Quick Links

Chapters

Table of Contents