Usb Configuration Cable - Huawei USG6000 Series Hardware Manual

HUAWEI USG6000 Series
Hardware Guide
RJ45 Pin
ID
NOTE
Technical Specifications
Table A-6
Table A-6 Technical specifications of the console cable
Item
Connector 1
Connector 2
Cable
Wire
A.1.5 USB Configuration Cable
The USB configuration cable connects the console port on the USG (mini USB) to the USB
port on a PC. Learn about the structure and specifications of the USB configuration cable
before you purchase any for the USG.
One end of a USB configuration cable is a mini USB connector, which connects to the
console port on the USG. The other end is a standard USB connector, which connects to the
USB port on a PC.
Structure and Appearance
Figure A-9
Issue 08 (2017-06-30)
Signal Direction
Pins in the same row are connected to each other using a cable.
The symbol → indicates that the signal travels from the RJ45 connector to the DB9 connector, whereas
the symbol ← indicates that the signal travels from the DB9 connector to the RJ45 connector.
Pos. 9 of the DB9 connector is empty.
shows the technical specifications of the console cable.
Description
DB9 connector - D model - 9PIN - female
RJ45 Network Interface Connector,Crystal Connector,8PIN,
8BIT,Shielded, Plug
Single Cable,Console Serial Port Cable,3m,D9F,CC4P0.48B(S),MP8-
VI
8
illustrates the appearance of a USB configuration cable.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
DB9 Pin ID Signal
A Appendix
378