HUAWEI USG6000 Series
Hardware Guide
Figure 3-9 Mounting the USG on a wall
----End
Follow-up Procedure
After wall-mounting is complete, verify that:
l
l
3.2.2 Connecting a PGND Cable
Connecting the PGND cable of a USG6305/6305-W/6310S/6310S-W/6310S-WL-OVS/
6510/6510-WL correctly is a key measure of surge protection and resistance to interference.
Before using the USG6305/6305-W/6310S/6310S-W/6310S-WL-OVS/6510/6510-WL,
correctly connect the PGND cable.
Prerequisites
The USG has been installed inside a cabinet.
Context
Instruments required:
l
l
Issue 08 (2017-06-30)
The USG is securely fixed on the wall.
A clearance of 10 cm is maintained around the USG and the air flow is not blocked.
Phillips screwdriver
Multimeter
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
3 Hardware Installation
253