Rear Panel - Huawei USG6000 Series Hardware Manual

HUAWEI USG6000 Series
Hardware Guide
Name
Expansion slot
Protective
ground terminal
ESD jack
SN

2.3.4.3 Rear Panel

The USG6680 rear panel provides power modules, a fan module, and boards, such as SPU.
The rear panel of the USG6680 is pictured in
Issue 08 (2017-06-30)
Description
Provides one WSIC slot and four XSIC slots. When a WSIC is installed
in the lower part of an XSIC slot, install a filler panel on the empty
upper part of the slot to ensure a normal air flow and keep out dust.
The M4 OT terminal connects the PGND cable to a cabinet, the ground
point of the workbench, or the ground bar in an equipment room.
The equipment end of the wrist strap is inserted into the ESD jack. For
the wrist strap to be effective, ensure that the device is already
grounded.
The serial number that uniquely identifies the device. When applying
for a license file, you must provide the SN of the device.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Figure 2-90.
2 Hardware Overview
202