Installation Environment Check - Huawei USG6000 Series Hardware Manual

Version v100r001 & v500r001
Hide thumbs Also See for USG6000 Series:
Table of Contents

Advertisement

HUAWEI USG6000 Series
Hardware Guide
l
l
Personal Safety Warnings
l
l
l
l
l
Device Security Precautions
l
l
l
l

3.1.2 Installation Environment Check

Before you install a USG, verify that the installation environment meets requirements to
ensure the normal running and extended life time of the USG.
Table 3-1
Table 3-1 Installation environment checklist
Check Item
Ventilation and heat
dissipation
Stability
Grounding
Temperature
Relative humidity
Cleanness
Electrostatic discharging
Issue 08 (2017-06-30)
Only authorized or certified personnel can replace Huawei components (including
software).
Installation and maintenance personnel must report all faults and errors that may cause
safety issues to the person in charge.
Do not operate or cable the device during electrical storms.
To avoid electric shock, do not connect the safety extra-low voltage (SELV) terminal to
the telephone-network voltage (TNV) terminal.
To avoid possible eye damage, do not look into the optical cable outlet without eye
protection.
Wear an antistatic suit, ESD gloves, and ESD wrist strap and remove any jewelry and
watches before entering the equipment room to avoid possible electrical shock or injury.
In the event of fire, evacuate the equipment room and nearby areas and pull the fire
alarm or call your local emergency number.
Fix the device on the ground or other secure places, such as against the wall or on the
mounting shelf.
Do not block the air vent when the device is running.
Tighten the screws with proper tools when installing the panels.
Remove all plastic packing materials from the equipment room after the installation is
complete.
lists installation environment check items.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Requirement
Complies with requirements
in
A.3.1 Device
Position.
Complies with requirements
in
A.3.2 Humidity,
Temperature, and
Cleanness.
Complies with requirements
in
A.3.3 ESD
Requirements.
3 Hardware Installation
Compliance
□ Y □ N □ N/A
□ Y □ N □ N/A
□ Y □ N □ N/A
□ Y □ N □ N/A
□ Y □ N □ N/A
□ Y □ N □ N/A
□ Y □ N □ N/A
243

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents