Usg6507/6530; Device Overview - Huawei USG6000 Series Hardware Manual

HUAWEI USG6000 Series
Hardware Guide
Item
NOTE

2.2.3 USG6507/6530

The USG6507/6530 has only AC models and no DC models and provides one power module
and fixed ports by default. However, optional modules, such as an additional power module,
hard disks, and expansion cards, are supported.

2.2.3.1 Device Overview

The USG6507/6530 uses an integrated chassis that contains the fixed interface board, power
module, and fan module. You can also add some optional modules, such as hard disk,
additional power module, and expansion cards, to improve system reliability and add more
ports.
Appearance
Figure 2-53
Figure 2-53 Appearance of USG6507/6530
Front view
Secospace USG6000
Rear view
SM-HDD-SAS300G-B
Hard disk combination (optional)
Table 2-42
Issue 08 (2017-06-30)
l a. The width does not include the size of mounting ears.
l b. The height is 1 U (1 U = 1.75 inches, or about 44.45 mm), which is a height unit defined in
International Electrotechnical Commission (IEC) 60297 standards.
l c. The actual transmit power depends on local laws and regulations.
l d. Temperature and humidity are measured 1.5 m above the floor and 0.4 m in front of the rack
when no protection plate exists before or after the rack.
illustrates the appearance of the USG6507/6530.
MGMT
2
0/1
3
SYS PWR MGMT
RST ALM HDD MODE
CONSOLE
describes the functions of the USG6507/6530 components.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Description
0 1 2 3 4 5 4 5
Fixed interface board
XXXXXXXXXXXXXXXXXXXXXXXXXXX
Power module
2 Hardware Overview
Expansion slots
OUTPUT
ON
OFF ~100-240V;50/60Hz;2.5A
Slot for optional
power module
Secospace USG6000
4 HDD 5 PWR 6 PWR
109